10mm Maillon
Ideal for connecting climbing wall components such as belay chains or quickdraw hangers. These stainless steel “Maillon Rapide” hangers have a load rating of 45kN lengthways and 10kN widthways.The post...
View ArticleHole Cleaning Brush
This handy brush is useful for cleaning out holes drilled into brick or masonry. This is essential to ensure the fixings (either resin or wedge anchors) fasten securely into the hole. The post Hole...
View ArticleMasonry SDS Drill Bit 12mm
This hard wearing 12mm drill bit is suitable for use with our wedge anchors. You will need an SDS compatible drill – the drill bit will not fit a standard chuck drill. The post Masonry SDS Drill Bit...
View ArticleMasonry SDS Drill Bit 18mm
This hard wearing 18mm drill bit is suitable for use with our threaded sockets. You will need an SDS compatible drill – the drill bit will not fit a standard chuck drill. The post Masonry SDS Drill Bit...
View Article8mm Hex Key
A (larger than normal) Tee Handled hex key for tightening up your hold bolts. Tried and tested, we haven’t managed to wear one out yet! Suits socket cap hold bolts with a larger 8mm socket (for the...
View Article6mm Hex Key
A Tee Handled hex key for tightening up your hold bolts. Tried and tested, we haven’t managed to wear one out yet! Suits standard countersunk hold bolts with a 6mm socket. The post 6mm Hex Key...
View ArticleQuick Draw
A permanent quickdraw for your climbing wall – they are usually mounted using Bolt Hangers to allow lead climbing on indoor walls. They feature a security bar to make life difficult for thieves. They...
View ArticleResin Cartridge 380ml
This polyester resin from Rawl is the best resin available for installing our threaded sockets into masonry such as brick or concrete. Use it with the resin gun listed below. The post Resin Cartridge...
View ArticleWedge Anchor Setting Tool
This metal rod is designed for use with our wedge anchors. Place the rod inside the anchor, hit it with a hammer a few times and hey presto – your wedge anchor is securely anchored into the wall, ready...
View ArticleResin Gun 380ml
A high quality tool for use with our resin cartridges, useful for installing sockets into a brick or masonry wall. With a smooth action, it allows for precise dispensing of the resin with minimal...
View Article