Wood Drill Bit 12mm
Useful for drilling plywood and timber in order to fit both types of our tee nuts.The post Wood Drill Bit 12mm appeared first on Wall Climber.
View Article10mm Maillon
Ideal for connecting climbing wall components such as belay chains or quickdraw hangers. These stainless steel “Maillon Rapide” hangers have a load rating of 45kN lengthways and 10kN widthways.The post...
View ArticlePozi Driver Bits (PZ2) 10 pack
Re-load your drill-driver with these to get a good grip on those awkward screws.The post Pozi Driver Bits (PZ2) 10 pack appeared first on Wall Climber.
View ArticleBolt Hanger
These Stainless Steel bolt hangers will kit out your climbing wall ready for clipping in those quickdraws. A polished finish with rounded edges to prolong the life of your krabs, these are a steal at...
View ArticleThreaded Socket
These sockets can be installed into a solid wall (brick, concrete or stone) using resin, and provide a strong, permanent anchor for your holds.Standard zinc sockets will last a long time but will...
View ArticleStainless Hold Bolts
These Countersunk bolts are suitable for all the holds we sell, unless otherwise stated.These ones are stainless steel, meaning they won’t go rusty in the outdoors. You can get them nice and tight with...
View ArticleWedge Anchor
These M10 wedge anchors are a simple way to attach holds to brick or masonry walls.You will also need a 12mm masonry drill bit and a setting tool.Drill a 12mm hole with a depth of 42mm. Then insert the...
View ArticleHold Bolts
These Countersunk bolts are suitable for all the holds we sell, unless otherwise stated.They are zinc passified for corrosion resistance, and you can get them nice and tight with one of our Hex...
View ArticleRound Backed Tee Nuts
Are you tired of hammering in tee nuts? Do you find they pop out of the back of the board eventually?These round-backed tee nuts are the perfect solution. Instead of spikes, they have two screw holes...
View ArticleTee Nuts
These shiny, spiky nuts can be hammered into the back of your plywood, allowing you to bolt your holds on and get climbing.For best results, drill an 11.5mm hole, and bang them in straight with a...
View ArticleHole Cleaning Brush
This handy brush is useful for cleaning out holes drilled into brick or masonry. This is essential to ensure the fixings (either resin or wedge anchors) fasten securely into the hole. The post Hole...
View ArticleMasonry SDS Drill Bit 12mm
This hard wearing 12mm drill bit is suitable for use with our wedge anchors. You will need an SDS compatible drill – the drill bit will not fit a standard chuck drill. The post Masonry SDS Drill Bit...
View ArticleMasonry SDS Drill Bit 18mm
This hard wearing 18mm drill bit is suitable for use with our threaded sockets. You will need an SDS compatible drill – the drill bit will not fit a standard chuck drill. The post Masonry SDS Drill Bit...
View Article8mm Hex Key
A (larger than normal) Tee Handled hex key for tightening up your hold bolts. Tried and tested, we haven’t managed to wear one out yet! Suits socket cap hold bolts with a larger 8mm socket (for the...
View Article6mm Hex Key
A Tee Handled hex key for tightening up your hold bolts. Tried and tested, we haven’t managed to wear one out yet! Suits standard countersunk hold bolts with a 6mm socket. The post 6mm Hex Key...
View ArticleQuick Draw
A permanent quickdraw for your climbing wall – they are usually mounted using Bolt Hangers to allow lead climbing on indoor walls. They feature a security bar to make life difficult for thieves. They...
View ArticleResin Cartridge 380ml
This polyester resin from Rawl is the best resin available for installing our threaded sockets into masonry such as brick or concrete. Use it with the resin gun listed below. The post Resin Cartridge...
View ArticleWedge Anchor Setting Tool
This metal rod is designed for use with our wedge anchors. Place the rod inside the anchor, hit it with a hammer a few times and hey presto – your wedge anchor is securely anchored into the wall, ready...
View ArticleResin Gun 380ml
A high quality tool for use with our resin cartridges, useful for installing sockets into a brick or masonry wall. With a smooth action, it allows for precise dispensing of the resin with minimal...
View Article